Kiwire support both pull and push agent monitoring method.

The pull method which is simple ping or snmp agent is configured via kiwire web admin system. however there are time where you need the device to send status update to kiwire via push method,

the api url for the push receiver at kiwire is at



  • Kiwire_ip , is the ip or hostname of your kiwire installation
  • device_name , is the name configured when you add device under devices for monitoring

Example 1 : Mikrotik
Script for Mikrotik

put the following under schedule for every 10 min

/tool fetch keep-result=no mode=http address=kiwire_ip src-path=(“/admin/nms?name=”.[/system identity get name].”)

assuming your mikrotik identity is set as the same name with kiwire device name.