image_pdfimage_print

Mikrotik

Video example

  1. Congratulation , your mikrotik NAS is configured , you are now  required to add the mikrotik into Kiwire NAS , first you are required to find your device mac address , to do this Click  on Interfaces menu  and double click on your hotspot network interface to view its MAC address. Copy the MAC address.
    setup_dev_mik_last
  2. Click System>Identitiy  in winbox and paste the MAC address. OK and Apply.
    setup_dev_mik_id
  3.  Now Login to Kiwire platform, Click Device>NAS. Click Add NAS. to add the mikrotik to Kiwire
    setup_dev_mik_kiwire1setup_dev_mik_kiwire2
  4. Fill in the the setup with the following information
    Device Type: Mikrotik
    NAS ID: MAC address of your Mikrotik Hotspot network interface
    IP Address: IP address of your Mikrotik WAN port
    Shared Secret Key: authentication key between your Mikrotik RADIUS and Kiwire
    COA Port: 3799
    NAS Username: Mikrotik username (optional)
    NAS Password: Mikrotik password (optional)
    Address: location of your Mikrotik (optional)
    Description: remarks for the devices

Ruijie Access Point without MACC

  1. Default configuration for Ruijie AP
Feature Default Settings
Web services Enabled
Management IP 192.168.110.1/255.255.255.0
Default username admin
Default password admin

 

  1. Open web browser access the GUI http://192.168.110.1 with Username: admin, Password: admin
    setup_dev_rjap_1
  2. Go to System > System Mode. Change the AP mode from FIT mode to FAT mode. The device will restart after mode switch.
    setup_dev_rjap_2
  3. To change the IP address, go to Advance > VLAN.
    setup_dev_rjap_3
  4. We need to create a wifidog template.  Telnet into the AP with (password: admin) and run below command:
    Ruijie#config
    Enter configuration commands, one per line.  End with CNTL/Z.
    Ruijie(config)#web-auth template wifidogTest wifidog           <===  wifidogTest is template name, any word is ok
    Ruijie(config.tmplt.wifidogTest)#ip 175.107.206.112            <===  ip : kiwire ip address
    Ruijie(config.tmplt.wifidogTest)#nas-ip 192.168.110.1           <===  nas-ip: AP ip
    Ruijie(config.tmplt.wifidogTest)#url http://175.107.206.112/user      <===  url: portal server authenticate url
    Ruijie(config.tmplt.wifidogTest)#exitRuijie(config)#wlansec 1                                                   <===  select wlan id
    Ruijie(config-wlansec)#web-auth portal wifidogTest       <===  apply web-auth template to wlan id
    Ruijie(config-wlansec)#webauth                                        <===  enable webauth (#no webauth) to disable
    Ruijie(config-wlansec)#exit
    Ruijie(config)#exit
    Ruijie#wBuilding configuration…
    [OK]
  5. After create the template, enable the wifi to use the wifidog template. Run below command:
    Ruijie(config)#wlansec 1         <===  select wlan id
    Ruijie(config-wlansec)#web-auth portal wifidogTest       <===  apply web-auth template to wlan id
    Ruijie(config-wlansec)#webauth                   <===  enable webauth (#no webauth) to disable
    Ruijie(config-wlansec)#exit
    Ruijie(config)#exit
    Ruijie#wBuilding configuration…
    [OK]
  6. Set the wifi SSID
    Ruijie(config)#dot11 wlan 1
    Ruijie(dot11-wlan-config)#ssid SSID_NAME <=== name your SSID here
  7. Also, enable http redirect to port 80 and port 443
    Ruijie(config)#http redirect port 80
    Ruijie(config)#http redirect port 443
  8. To configure the DNS
    Ruijie(config)#ip name-server 8.8.8.8
    Ruijie(config)#ip name-server 8.8.4.4
  9. On Kiwire add Nas of the new apLogin to Kiwire, go to Device > NAS. Click Add NAS. dev_add_wifinas
    • Fill in the the setup with the following information
      Device Type: Wifidog
      NAS ID: AP serial No
      IP Address: IP address of your AP IP
      Shared Secret Key:  dummypassword
      COA Port: 3799
      NAS Username: ( Not required )
      NAS Password:( Not required )
      Address: location of your AP (optional)
      Description: remarks for the devices

Ruijie AP with MACC

coming soon