image_pdfimage_print

Tested versions:

Controller Version 3.5.1.0.296
Model Virtual SmartZone Essentials (vSZ-E)
Control Plane Software Version 3.5.1.0.205
AP Firmware Version 3.5.1.0.419
AP Model R310

 

  1. Northbound API

We need to enable the Northbound Portal Interface Support.

In System > General Settings, go to Northbound Interface. Enable the Northbound Portal Interface Support. Put username as admin and password firmwara*2

2. Create Hotspot

In Services & Profiles > Hotspots & Portals, create new Hotspot (WISPr). Use external Logon URL point to http://kiwire_ip/user and the Redirected MAC Format as below.

For the Wall Garden, add the Kiwire IP Address and for the social wallgarden.

3. Authentication and Accounting Radius Servers

In Services & Profiles > Authentication, create 1 for Non-Proxy (AP Authenticator). Put Kiwire IP address in Primary Server using port 1812. Set the Shared Secret key as firmwara*2.

After that in Services & Profiles > Accounting, create 1 for Non-Proxy. Put Kiwire IP address in Primary Server using port 1813. Set the Shared Secret key as firmwara*2.

4. Create WLAN

In Wireless LANs, create new. Select Hotspot (WISPr) for the Authentication Type, Authentication Options: Open, Encryption Options: None

Under Hotspot Portal, enter the Hotspot (WISPr) Portal, Authentication and Accounting Server you created in step 2 and 3.

Under Radius Options, set NAS ID: AP MAC, Delimiter: Dash, Called STA ID: AP MAC.

KIWIRE

  1. Login to Kiwire Captive Portal; http://Kiwire_IP_Address/admin

2. Go to Device > NAS and add NAS for Ruckus Controller

Device Type Ruckus SCG/VsZ
NAS Id Ruckus_Controller
IP Address IP address of Ruckus Controller
Shared Secret Key firmwara*2
COA Port 3799
Nas Username Username of Ruckus Controller
Nas Password Password of Ruckus Controller

 

Then add another NAS for the Ruckus AP

Device Type Ruckus SCG/VsZ
NAS Id MAC address of the Ruckus AP

Ensure the MAC address is as

“AA-BB-CC-11-22-33”

IP Address IP address of Ruckus AP
Shared Secret Key firmwara*2
COA Port 3799
Nas Username Username of Ruckus AP
Nas Password Password of Ruckus AP

 

*NoteIf you have more than 1 Ruckus AP to use, just add another NAS and modify the NAS Id, IP Address, Nas Username and Nas Password.

3. Go to Device > Zone and create a zone for Ruckus. We can assign the zone based on NAS ID, VLAN, IP address, or SSID.

4. After that, edit the zone and click Add and add the Ruckus AP MAC address in the NAS ID field